HMS2 HEAVY MELTING SCRAP

PRODUCT DESCRIPTION:
Clean Plate And Structural Steel Scrap Thickness Is Not Less Than 3 to 5-Millimeter “mm” For Individual Pieces And The Product Is To Be Free Of Attachments.
APPLICATIONS:
Used In The Electric Arc Furnace As A Raw Material

TYPICAL DATA:

SPECIFICATION
Steel Scraps Shall Be Considered Free Of Alloys When The Residual Alloying Elements Must Not Exceed The Following
Percentages:
Nickel .45% Molybdenum .10% Chromium .20% Manganese 1.65%
The Combined Residuals Other Than Manganese Shall Not Exceed 0.60 %.

INSTITUTE OF SCRAP RECYCLING INDUSTRIES “ISRI” CODE
203,204,205

SIZE

Length Less 1.00 Meter “m”X

Width Less 0.50 Meter “m” X

Thickness 3 to 5 Millimeter “mm”

DENSITY

More 0.45 Tons Per Cubic Meter “Ton/m3”

MUST NOT CONTAIN
Unwanted Materials That Are Not Made Of Steel And Iron May Affect The Quality Of Steel Produced.
It Must Be Free From:

Hazardous Materials

“Closed Containers, Ammunition, Radioactive Materials, Chemicals And Flammable Materials etc....”

Non-Conductive Materials

“Dirt, Moisture, Metal Cans, Cast Iron, Wood, Rubber, Plastic, Oil, etc....”